Samsung CLP-610ND - Page 22

Product spec and feature
Samsung Electronics
Service Manual
2-13
6) MPF (Multi Purpose Feeder)
The Multi-Purpose Feeder not only feeds general printing paper but is also used for many other
kinds of paper such as those paper sizes not supported by the cassette, envelopes, OHP, etc.
> Spec.
* Capacity : Cut Sheet : 100 Sheets (Standard paper 75mg/m
2
20lb)
* OHP : 300 Sheets
* Envelope & Label & Card Stock : 10 Sheets
* Paper Arrangement : Side Registration
* Power : Main Motor (Stepper Motor)
* Driving Management : Solenoid
* Paper Discharge : Friction Pad Method
* Paper Size : Legal, Folio, A4, Letter, Executive, JIS B5, A5, A6
* Paper Weight (Average) : 75~163g/m
2
* Paper Type : General, Label, Post Card, Transparency, Envelope, Card Stock (Tracing
Paper is not served)
* Additional Function : Paper Empty Sensor
7) Feeder
* Paper Arrangement : Side Registration.
* Power : Main Motor (Stepper Motor)
* Paper Management : Shutter Method
8) Duplex Unit
The Duplex function is used Duplex Unit of the PTB_SET.
CLP-660N : Manual
CLP-610ND,CLP-660ND : Built-in
9) Exit Unit
The Exit Unit guides paper that is just about to leave the print engine. Printed-paper is discharged
by the Exit Roller and Kicker into the Output Tray.
> Spec.
* Capacity : 250 sheets (Standard A4, 75g/m2)
* Paper Direction : Face Down
* Exit Drive Roller : It is driven by Main Motor (BLDC), and it rotates clockwise for normal
feed and antic-clockwise when reverse feeding for duplex printing.
* Sensor : There is photo interrupt sensing (GPIS73)
* Jam Detect : Exit Cover Open.