Service Manual
Adjustment and Troubleshooting
4-4
Samsung Electronics
3. Close the front cover.
4. Pull the tray open. After you pull it all the way
out, lift up the front part of the tray slightly to
release the tray from the machine.
5. Remove the jammed paper by gently pulling it
straight out as shown below.
6. To replace the tray, lower the rear edge, align it
with the slot, and slide it into the machine.
7. After removing the jammed paper, check for
paper which may be jammed in other parts of
the machine.
8. Close the front cover firmly. The machine will
resume printing.
To Next Page
Loading...
