Adjustment and Troubleshooting
Service Manual
4-45
Samsung Electronics
Non Genuine
Toner
Open Heat Error
Cycle Power
Outer Temp.Open
Cycle Power
Outer Temp.Short
Cycle Power
Over Heat Error
Cycle Power
Paper Jam 1
Open/Close Door
Paper Jam 2
Check Inside
Remove Jam
Open/Close Door
Replace Fuser
Replace Fuser
Soon
Replace Toner
Replace Transfer
Belt
Replace Transfer
Belt Soon
Replace tray
Pick-Roller
Self Diagnostics
LSU
Self Diagnostics
Temperature
Sleeping...
System Fan
Locked
Thermistor Open
Cycle Power
The color toner cartridge which the arrow
indecates may be recycled-toner.
The temperature for the fuser unit is over the
normal range.
The outer temperature of the machine is over
the normal range.
The outer temperature of the machine is
under the normal range.
The fuser unit is overheated.
Paper has jammed inside the machine.
Paper has jammed in the paper exit area.
Paper has jammed in the fuser area.
The life of the fuser unit is expired.
The life of the fuser unit will be expired soon.
This message appears between Toner Low
and Toner Empty.
The life of the transfer belt is expired.
The life of the transfer belt will be expired
soon.
The life of the tray pick-roller expired.
The LSU (Laser Scanning Unit) in your
machine is checking some problems detected.
The engine in your machine is checking some
problemd detected.
The machine is in the power save mode.
There is a problem with the main fan for the
machine.
There is a problem in the temperature sensing
device for the fuser unit. This device detects
value over the normal value range.
Install the corresponding toner cartridge with a
Samsung-genuine cartridge.
Unplug the power cord and plug it back in. If
the problem persists, contact the service
representatives.
Unplug the power cord and plug it back in. If
the problem persists, contact the service
representatives.
Unplug the power cord and plug it back in. If
the problem persists, contact the service
representatives.
Unplug the power cord and plug it back in. If
the problem persists, contact the service
representatives.
Clear the jam.
Clear the jam.
Clear the jam.
Replace the fuser unit with a new one.
Please, contact the service representatives.
Replace the fuser unit with a new one.
Please, contact the service representatives.
Replace the corresponding toner cartridge with
a Samsung-genuine cartridge.
The arrow indicates which color toner cartridge
has to be replaced.
Replace the fuser unit with a new one.
Please, contact the service representatives.
Replace the transfer belt with a new one.
Please, contact the service representatives.
Replace the fuser unit with a new one.
Please, contact the service representatives.
Please, wait a few minutes.
Please, wait a few minutes.
When data is received, it switches to on-line
automatically.
Unplug the power cord and plug it back in. If
the problem persists, contact the service
representatives.
Unplug the power cord and plug it back in. If
the problem persists, contact the service
representatives.
Message Explanation Solution
To Next Page
Loading...
