Samsung CT14D8 - Connecting a VCR

C HAPTER T WO : I NSTALLATION 2.5
IN S TA L L AT I O N
3
Connect a coaxial
cable to the VCR’s
ANTENNA OUT termi-
nal.
4
Connect the other end
of the cable to the TV’s
antenna terminal.
5
Connect an audio cable
to the VCR’s AUDIO
OUT terminal.
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable
TV system (according to the instructions on pages 2.1-2.4). Skip step 1 if you have not yet
connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the back of
the TV.
2
Connect the cable or
antenna to the VCR’s
ANTENNA IN terminal.