Samsung DCS-816 - Page 4

SAMSUNG Installation
DCS-816 March 1999
ii
PART 8. CHANGING SOFTWARE (FIGURE 8-1)…………………………………………8-1
FIGURES
FIGURE 2-1 ATTACHING MOUNTING BRACKET TO BACKBOARD
FIGURE 2-2 GROUNDING THE KSU
FIGURE 2-3 MDF CABLING
FIGURE 2-4 CONNECTING A SYSTEM BACKUP BATTERY
FIGURE 2-5 SELECTING OPTIONS ON THE BASIC KSU
FIGURE 3-1 INSTALLING OPTION CARDS AND A TRUNK CARD
FIGURE 3-2 SIO OPTION CARD AND AA OPTION CARD
FIGURE 3-3 8TRK CARD AND 2/4BRI CARD
FIGURE 3-4 4TRK CARD
FIGURE 4-1 CONNECTING POWER TO THE SYSTEM
FIGURE 4-2 REPLACING FUSES (POWER SUPPLY UNIT)
FIGURE 5-1 CONNECTING LOOP-START LINES
FIGURE 5-2 CONNECTING OPX LINES
FIGURE 5-3 CONNECTING BRI LINES
FIGURE 6-1 CONNECTING DIGITAL KEYSETS
FIGURE 6-2 CONNECTING SINGLE LINE TELEPHONES
FIGURE 6-3 CONNECTING A DOOR PHONE AND LOCK RELEASE
FIGURE 6-4 CONNECTING A CTM (TAPI)
FIGURE 6-5 CONNECTING ISDN TE
FIGURE 7-1 CONNECTING EXTERNAL MUSIC
FIGURE 7-2 CONNECTING EXTERNAL PAGING EQUIPMENT
FIGURE 7-3 CONNECTING AN EXTERNAL LOUD BELL
FIGURE 7-4 PIN CONNECTIONS TO PRINTER
FIGURE 7-5 PIN CONNECTIONS TO PC
FIGURE 7-6 PIN CONNECTIONS TO MODEM
FIGURE 7-7 CONNECTING VM/AA
FIGURE 7-8 INFORMATION ON SERIAL INTERFACE
FIGURE 8-1 CHANGING SOFTWARE
Technical Manuals Online! - http://www.tech-man.com