Samsung DCS-816 - 2.2 PROGRAM PROCEDURES

SAMSUNG Installation
DCS-816 March 1999
2-2
2.2 UNPACKING AND INSPECTION
After unpacking the KSU, inspect for any signs of physical damage. If any damage is detected, do
not attempt to install. Contact the local distributor for advice.
Check to see that the Basic KSU carton includes the following items.
ü Basic Key Service Unit (KSU)
ü AC Power Cord
ü Wall-mount bracket
ü Spare fuses
ü Cable ties and screws
ü Battery connection cable
ü SLT User’ s Guide (Standard telephone)
2.3 MOUNTING THE KSU (Figure 2-1)
DCS-816 can be wall-mounted. The KSU should be mounted on a plywood backboard at least 15
mm thick. Attach the wall-mount bracket to the backboard with the screws supplied and hang the
KSU on the bracket.
FIGURE 2-1
ATTACHING MOUNTING BRACKET TO BACKBOARD
Technical Manuals Online! - http://www.tech-man.com