Samsung DH105EAMC - Cleaning Your Air Conditioner; Air Filter Cleaning Procedure

Samsung Electronics3-1
23833A(2)_1 10/19/05 10:31 AM Page 2-14
3. Alignment and Adjustments
3-1 E. S. P(External Static Pressure) Setting for Phase Control Motor
With its phase control motor, you can adjust the indoor unit fan speed depending on the installation
condition. If the external static pressure is high so that the duct becomes longer or if the external static pressure is low so that the duct
becomes shorter, adjust the fan speed by referring the following table. Refer to the page 3-1 to set the option code.
Note : • represents E. S. P(External Static Pressure) range of factory setting.
You don't have to adjust the fan speed separately if the external static pressure of the installation place is in .
When it is out of , input the appropriate option code.
• If you input the inappropriate option code, error may occur or the air conditioner is out of order. The option code must be
inputted correctly by the installation specialist or service agent.
Static Pressure(mmAq)
Model
CMM
(CFM)
Step
Option Code for Indoor Unit
1086420
DH105EAMC
Hi
Mid
Low
29.5(1041)
27(953)
24(847)
DH140EAMC
Hi
Mid
Low
38(1341)
34(1200)
29.5(1041)
015813
-13018E
015814
-1300A0
015814
-1300C2
015814
-1300E5
015814
-130217
015814
-130249
015814
-1303E1
-
015814
-100091
015814
-1000A2
015814
-1000C3
015814
-1000E5
015814
-100247
015814
-1002FC
15
Model
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Remote
Control
DH105EAMC
DH140EAMC
Option items