Samsung Electronics 3-10
No Parts Procedure Remark
3 A
ss’y Control Out 1) Detach several connectors from the
Ass’y Control Out.
2) Detach several connectors from the PCB
o
f Ass’y Control Out.
3) P
ull up the Ass’y Control Out.
4 H
eat Exchanger 1) Release the refrigerant at first.
2) L
oosen fixing screw on both sides.
3) Disassemble the pipes in both inlet and
outlet with welding torch.
4) D
etach the Heat Exchanger.
To Next Page
Loading...
