■ OPTION ITEMS
Operation method Applicable button Indicating state
Step 27
Method)
If the steps 1 to 26 are completed, remove
t
he battery and insert it again to return to
the original display of remote controller.
(Operation mode/SET TEMP.
/
fan speed displays.)
Error
① If the On/Off, Timer and Fan
indica
tor is flickering, the wrong option
code is input. Put off the power of
indoor unit and turn it on again and
then input the option code again.
If the same error occurs, it is the
EEPROM is defective or not inserted.
Replace the PCB.
②
If all of On/Off, Timer, Fan and Filter
Sign indicator are flickering along with
the "Tiriring" sound, there is option
code already input which are different
from the current ones.
Check the option code and press the
button again if correct. Option code will
be input.(Check the option code
correctly. At the time, if the same error
continues to occur, the option code is
out of input range.
Check the option code again and repeat
the step 1~26.
rear side
Static Pressure
DH140CAV DH105CAV
Option Code Option Code
12mmAq 016774-13C2FF-200001-300000 015774-11C2DD
-200001-300000
10mmAq 016774-13C2CC-200001-300000 015774-11C28A-200001-300000
8mmA
q 016774-13C2AA-200001-300000 015774-11C248-200001-300000
6mmA
q 016774-13C286-200001-300000 015774-11C224-200001-300000
4mmA
q 016774-13C264-200001-300000 015774-11C0F1-200001-300000
2mmA
q 016774-13C240-200001-300000 015774-11C0E0-200001-300000
0mmA
q 016773-13C32E-200001-300000 015773-11C1CE-200001-300000
4-14
To Next Page
Loading...
