Samsung DH140EAV - Setting Option Setup Method

Samsung Electronics
4-3 Setting Option Setup Method
Be sure to input the option code suitable for the indoor unit by use of wireless remote controller after replacing the PCB of
indoor unit. Follow to do the following 27 steps sequentially.
Example : 021E31-142285-2A3114-39421F
Operation method Applicable button Indicating state
Step 1
Method)
①
Remove the battery of remote
controller.
②
Push the Off Timer and Cancel button
simultaneously.
③I
nsert the battery.
Result)
When the display of remote
controller is indicated as shown
in the right, then go to the step 2.
Step 2
Method)
If the first digit of remote
c
ontroller shows "0", go to the step 3.
•
If it shows 1, press the Mode button one
time to change it into 0 and then go to step
3.
Step 3
Method)
Input the second digit of option code by
p
ressing the High Temp button.
e
xample) 021
E311422852A311439421F
Result)
If 2 is displayed, go to the step 4
(
whenever pressing the button, 1~9,
A,B,C,D,E,F are lit in order.)
4-5
DB98-29522A_USA_SM.indd 25 2008-2-29 13:18:15