27
READY
PREPARATION
Using the AC power adapter
If you have access to a mains supply, using an AC Adapter
allows the camera to be used for long periods of time. If you
connect the camera to a computer, it is advisable to use an AC
adapter, as this will enable extended use.
Plug the adapter into the connection point (DC IN 3.3V) on the
camera.
Attaching the strap
To prevent accidental damage to the camera, always use the strap.
Refer to the illustrations below
DANGER/ NOTICE
Always turn off the power before taking the AC adapter out of the mains supply.
As with all mains powered devices, safety is important. Ensure that neither the camera nor
adapter comes into contact with water or metallic materials.
Please ensure that you use an AC adapter with the correct specification for the camera (3.3v
/2.0A). Failure to do so may affect your warranty.
12
To Next Page
Loading...
