93
SOFTWARE
Removable Disk
SOFTWARE MANUAL
To use this camera as a Removable Disk, install(p.87) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [ Removable Disk ] under [My computer] or [ Windows Explorer].
3. Image files stored in the Removable Disk(Dcim 100sscam) can be transferred to the PC.
NOTICE
Important information whilst using the Removable Disk
The [Removable Disk] indicator will not show when the camera power is off.
We recommend that you should copy the images to the PC to view them. Opening images
directly from the removable disk may be subject to unexpected disconnection.
When uploading images from the PC to the camera, ensure that the uploaded file names are
not the same as those already stored on the memory.
When you upload a file that is not taken by this camera to Removable Disk, the ERROR
FILE message will be displayed on the LCD monitor in the PLAY mode, and nothing is
displayed in THUMBNAIL mode.
The green lamp next to the viewfinder will blink, when a file
is transferred (copy or deletion) between the PC and the
camera. Do not remove the USB cable until the lamp stops
blinking. To remove the USB cable in Windows
2000/ME/XP, use the [Unplug or Eject Hardware] icon on
the task bar.
[Green lamp]
To Next Page
Loading...
