67
ADVANCED
SETUP MODE
Starting the SETUP mode
Beep
A beep will sound when you press the camera button and you
can check the camera conditions.
Rotate the mode dial to the SETUP mode, allowing you to set up the basic camera settings.
1. Turn the camera power on.
2. Select the SETUP mode by rotating the mode dial.
3. [SETUP 1/2] menu will be displayed.
4. Select [BEEP] by pressing the UP(
)/ DOWN ( ) button.
5. Press the SET( ) button and the sub menu will be displayed.
6. Press the UP( )/ DOWN ( ) button and select [ON] or [OFF].
Press the SET( ) button to confirm the setting.
7. The default is [ON].
SETUP 1/2
BEEP ON
POWER OFF 10 MIN
DATE IMPRINT ON
DATE TYPE YMD
MOVE PAGE:
SETUP 1/2
BEEP ON
POWER OFF 10 MIN
DATE IMPRINT ON
DATE TYPE YMD
CHANGE:
SETUP 1/2
BEEP
ON
OFF
EXIT:MENU SET:
To Next Page
Loading...
