Samsung DIGIMAX 201 - Quick View

72
SETUP MODE
QUICK VIEW
1. Turn the camera power on.
2. Select the SETUP mode by rotating the mode dial.
3. [SETUP 1/2] menu will be displayed.
4. To shift the menu cursor to [SETUP 2/2], press the RIGHT( )
button.
5. Press the UP( )/ DOWN ( ) button and select [QUICK
VIEW].
6. Press the SET( ) button and the sub menu will be displayed.
7. Select the desired review time by pressing the UP( )/
DOWN( ) button.
Press the SET( ) button to confirm the setting.
8. The default is [1 SEC].
You can briefly review the last image captured.
You can select the review time from a choice of CANCEL/ 1/ 2/ 3 SEC.
SETUP 2/2
DATE SETUP
QUICK VIEW 1 SEC
LANGUAGE ENGLISH
RESET
CHANGE:
SETUP 2/2
QUICK VIEW
OFF
1 SEC
2 SEC
3 SEC
EXIT:MENU SET:
SETUP 2/2
DATE SETUP
QUICK VIEW 1 SEC
LANGUAGE ENGLISH
RESET
MOVE PAGE: