71
ADVANCED
SETUP MODE
DATE SETUP
INFORMATION
The selection range for date/time setup covers
from 2000~2099. (It is automatically programmed
to allow for a leap year/ month)
NOTICE
If the batteries or AC adapter are removed, it is necessary to reset the time /date.
The Recording date is displayed on the LCD monitor in PLAY mode.(DATE IMPRINT : ON)
1. Turn the camera power on.
2. Select the SETUP mode by rotating the mode dial.
3. [SETUP 1/2] menu will be displayed.
4. To shift menu cursor to [SETUP 2/2], press the RIGHT( )
button.
5. Press the UP( )/ DOWN ( ) button and select [DATE
SETUP].
6. Press the SET( ) button and the sub menu will be displayed.
You can change the date/time on the LCD monitor display by
pressing the UP( )/ DOWN( )/ LEFT( )/ RIGHT( )
button.
LEFT( )/ RIGHT( ) button : you can select
year/month/day, hour/minute by pressing these buttons.
UP( ) button :Increases the number of items
DOWN( ) button : Decreases the number of items
To confirm the setting, shift the cursor to [MINUTE] and press
the SET( ) button.
You can change the imprinted date/time
SETUP 2/2
DATE SETUP
QUICK VIEW 1 SEC
LANGUAGE ENGLISH
RESET
MOVE PAGE:
SETUP 2/2
DATE SETUP
QUICK VIEW 1 SEC
LANGUAGE ENGLISH
RESET
CHANGE:
DATE SETUP
DATE 2002/02/15
TIME 20:05
EXIT:MENU SET:
To Next Page
Loading...
