96
Setting up the USB Driver for MAC
SOFTWARE MANUAL
1. A USB Driver for MAC is not included with the Application CD as MAC OS support the camera
driver.
2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up.
This camera is compatible with MAC OS 9.0~10.2.
3. Connect the camera to the Macintosh and turn the camera power on in PC mode.
4. A new icon (Untitled) will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
1. Double click a new icon (Untitled) on the desktop and the folder in the memory will be displayed.
2. Select an image file and copy or move it to MAC.
NOTICE
If you use Mac OS 10.0 or later, you may experience happening an error when you transfer
files from the PC to the camera.
To Next Page
Loading...
