89
SOFTWARE
SOFTWARE MANUAL
INFORMATION
If you have installed the camera driver, [Found New
Hardware Wizard] may not open.
After the [Found New Hardware Wizard] window opens,
a window may open to select the camera driver file
location.
In this case, select [C:\WINDOWS\INF\OTHER] folder. If
you can’t find [INF\OTHER] folder, check [Show all files]
button in [Window's Explorer View Folder option
View].
It is recommended that you use an AC adaptor(Optional) when connecting the camera to a
computer.
4. After restarting the computer, connect the PC to the camera with the USB cable.
5. Turn the camera power on. [Found New Hardware Wizard] will
open and the computer will recognize the camera.
* If you have ever installed an image viewer program, the program
will open. If the image viewer program opens, the camera driver
was setup successfully.
6. If you can see [Removable Disk] under [My computer], the
camera driver installation is successful. Now you can transfer
image files from the camera to PC via the USB cable.
To Next Page
Loading...
