115
31. To apply changes, you must restart the computer.
Select [Yes, I want to restart my computer now], and
then click [Finish].
[Click !]
Setting up the application software
33. Turn the camera power on.
[Found New Hardware Wizard] will open and the
computer will recognise the camera.
* If you have ever installed an image viewer program
or your OS is Windows XP, an image viewer
program will open.
If the image viewer program opens, the camera
driver was setup successfully.
32. After restarting the computer, connect the PC to the camera with the USB cable.
34. If you can see [Removable Disk] under [My
computer], the camera driver installation was
successful.
Now you can transfer image files from the camera to
PC via the USB cable.
To Next Page
Loading...
