56
READY
Sharpness
You can select the still image sharpness.
1. Rotate the mode dial to the RECORDING mode and press the MENU button.
2. Press the DOWN and the cursor will be shifted to the main menu.
3. Select [SHOOTING] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [SHOOTING] menu and the
next menu page will be displayed.
5. Select [SHARPNESS] menu by pressing the UP/DOWN button.
6. Press the RIGHT button and the cursor will shift to the
[SHARPNESS] sub menu.
7. Select the desired sub menu by pressing the UP/DOWN button.
SOFT : This gives smooth edges and the final image will
have a soft appearance.
NORMAL : This setting will give a standard finish to the final image.
HARD : This will give the image a crisp and clear appearance.
Press the OK button to confirm the setting.
Press the menu button twice and the menu display will be disappeared. Take a picture.
INFORMATION
Even though the camera is restarted, the sharpness setting is maintained.
EXIT: MENU
PORTRAIT SETUP MyCAM
PAGE :
SIZE
QUALITY
METERING
SHOOTING
L 2272X1753
FINE
MULTI
SINGLE
To Next Page
Loading...
Need help?
General
