To Next PageTo Next PageWhy is 5.1 channel sound not working on my Samsung DVD-C460?
5.1 channel sound is only reproduced when: the Samsung DVD player is connected to the proper amplifier, and the disc is recorded with 5.1 channel sound. Check that the disc has the “5.1 ch” mark. Also, verify your audio system is working correctly and that the Audio Output in the SETUP Menu is set to Bitstream.
What to do if I forgot the password on my Samsung DVD Player?
To reset a forgotten password on your Samsung DVD Player, press and hold the ? / button on the front panel for more than 5 seconds when there is no disc inside. This will revert all settings, including the password, to factory defaults. Use this method only when absolutely necessary.
General| Type | DVD Player |
|---|---|
| Video Output | Composite, S-Video, Component |
| Video Upconversion | Yes |
| Progressive Scan | Yes |
| Surround Sound | Dolby Digital, DTS |
| Disc Formats Supported | DVD-R, DVD-RW, CD, CD-R, CD-RW |
| Audio Output | Digital Optical, Digital Coaxial |
| Audio D/A Converter | 24-bit |
| Video D/A Converter | 108 MHz |
| Playback Formats | MP3, JPEG |
