What to do if I forgot the password for my Samsung DVD Player?
If you forgot the password for your Samsung DVD Player, press and hold the button for more than 5 seconds while no disc is inserted. This will revert all settings, including the password, to factory defaults. Use this method only when absolutely necessary.
What to do if my Samsung DVD-HD850 does not play disc?
If your Samsung DVD Player isn't playing discs, ensure the disc is placed with the label side facing up. Also, verify that the region number of the DVD is compatible with your player.
What to do if my Samsung DVD-HD850 DVD Player remote control is not working?
If your Samsung DVD Player's remote control isn't working, first check and replace the batteries. Ensure you're within 20 feet of the DVD player. If it still fails, remove the batteries, press and hold any button(s) for several minutes to reset the remote's microprocessor, then reinstall the batteries and try again.
What to do if my Samsung DVD-HD850 DVD Player disc does not play?
If your Samsung DVD Player isn't playing a disc, make sure the disc is inserted with the label side facing up. Also, check the region number of the DVD to ensure it's compatible with your player.
Why is the play mode on my Samsung DVD Player different from the Setup Menu selection?
If the play mode on your Samsung DVD Player differs from the Setup Menu selection, the disc might not be encoded with the function you selected. Some functions in the Setup Menu only work if the disc supports them.
What to do if the screen is blocked on Samsung DVD Player?
To unblock the screen on your Samsung DVD Player, press the button for more than 5 seconds with no disc inside the player. This will revert all settings to the factory defaults.
What to do if I see snow noise on my Samsung DVD-HD850's HDMI output?
If your Samsung DVD Player's HDMI output is showing snow noise, it indicates that your TV does not support HDCP (High-bandwidth Digital Content Protection).
Why is there HDMI output judder on my Samsung DVD-HD850 DVD Player?
If you're experiencing judder with the HDMI output on your Samsung DVD Player, check if your TV system setup is correct. The judder might occur when the frame rate is converted from 50Hz to 60Hz for 720P/1080i HDMI Output.
Why is there no audio from my Samsung DVD Player?
If you're not getting any audio from your Samsung DVD Player, check that you've selected the correct Digital Output in the Audio Options Menu.
Why is there no 5.1 channel sound from my Samsung DVD-HD850 DVD Player?
5. 1 channel sound will only work if: 1. The DVD player is connected to the correct amplifier. 2. The disc has 5.1 channel sound recorded on it. So, check the disc for a '5.1 ch' mark, ensure your audio system is properly connected and working, and verify that the Audio Output in the SETUP Menu is set to Bitstream.
General| I/O ports | 1 x S-Video in, 1 x S-Video out, 1 x DVI, 1 x SCART |
|---|---|
| Dimensions (WxDxH) | 430 x 240 x 45 mm |
Identification and function of buttons (e.g., STANDBY, OPEN/CLOSE) and displays on the player's front.
Explanation of all buttons and their functions on the remote control for operating the DVD player.
Guide to selecting the correct cables for connecting to TVs and audio systems.
Instructions for connecting the player to a television via Video, S-Video, Component, DVI, or HDMI outputs.
Steps for connecting the player to a stereo or multi-channel audio system for enhanced sound.
Steps for inserting and playing a disc, including basic playback controls like PLAY/PAUSE and STOP.
Customizing the picture display to match your TV screen size (16:9 or 4:3) and disc format.
Choosing the preferred audio track language for movies and music from available options.
Accessing and navigating the player's main configuration settings for customization.
Implementing controls to restrict viewing of unsuitable movie content based on disc ratings.
Defining the age or content rating level for parental control to filter movie playback.
Setting or changing the password for parental control access to manage settings.
Solutions for common operational problems, error messages, and performance issues.
To Next Page
