How to remove noise bars or streaks on playback on Samsung DVD-V5500?
If you see noise bars or streaks on playback with your Samsung DVD VCR Combo, press the TRK ( or ) buttons to minimize this effect.
How to resolve TV interference when tuning to Samsung DVD-V5500?
If you experience interference when tuning your TV to the Samsung DVD-VCR Combo, remove the aerial input plug from the jack marked with the aerial symbol on the rear of the DVD-VCR. Follow the instructions for 'Tuning Your Television for the DVD-VCR'. Then follow the instructions for 'Setting the DVD-VCR output Channel', and move the channel number several channels down from the original setting. Replace the aerial plug into the jack marked with the aerial symbol on the rear of the DVD-VCR. Re-tune your TV to the DVD-VCR again by following instructions 'Tuning Your Television for the DVD-VCR'. If the problem persists, repeat these steps, moving several more channels away from the original setting.
What to do if timer recording is unsuccessful on Samsung DVD-V5500 DVD VCR Combo?
If timer recording was unsuccessful on your Samsung DVD VCR Combo, ensure the STANDBY/ON button was pressed to activate the timer. Re-check the recording start/stop time settings. Note that a power failure or interruption during timer recording will cancel the recording.
Why can't I see normal broadcasts on my Samsung DVD-V5500?
If you cannot see normal broadcasts on your Samsung DVD VCR Combo, check the tuner or external setting and ensure it is set to tuner. Also, check the TV or VCR aerial connections.
Why my Samsung DVD-V5500 didn't record the TV programme?
If your Samsung DVD VCR Combo didn't record a TV program, check the DVD-VCR aerial connections and make sure the tuner is properly set. Also, verify that the safety tab on the cassette is intact.
What to do if Samsung DVD-V5500 DVD VCR Combo disc does not play?
If your Samsung DVD VCR Combo disc does not play, make sure the disc is inserted with the label side facing up. Also, verify the DVD region code is compatible with your player.
Why is my Samsung DVD-V5500 remote not working?
If the remote control isn't working with your Samsung DVD VCR Combo, first check and replace the batteries if needed. Ensure you are within 20 feet of the unit. If problems persist, remove the batteries, press and hold any button(s) on the remote for a few minutes to reset its microprocessor, then reinstall the batteries and try again.
How to fix no power on Samsung DVD-V5500?
If your Samsung DVD VCR Combo has no power, verify that the power plug is securely connected to a working wall outlet.
Why Samsung DVD-V5500 DVD VCR Combo disc does not play?
If a disc isn't playing on your Samsung DVD VCR Combo, make sure the disc is inserted with the label side facing up and check the region number of the DVD to ensure it is compatible.
How to fix a Samsung DVD-V5500 DVD VCR Combo with no power?
If your Samsung DVD VCR Combo has no power, ensure the power plug is properly connected to the wall outlet. Also, verify that you have pressed the STANDBY/ON button.
General| Audio formats supported | MP3, WMA |
|---|---|
| I/O ports | RF in RF out SCART Composite out Audio L/R out |
| Zoom capability | Yes |
| Digital audio coaxial out | 1 |
| Device type | DVD player |
| Product color | Silver |
| Disc types supported | DVD+RW, DVD-R, DVD-RW |
Guidelines for safe operation and handling of the DVD-VCR unit.
Guidelines for proper storage of discs to prevent damage and ensure longevity.
Instructions for cleaning and maintaining the exterior of the DVD-VCR unit.
Lists the included accessories with the DVD-VCR unit.
Step-by-step instructions for inserting batteries into the remote control.
Overview of the DVD-VCR's capabilities and main functions.
Details on playable disc types, their sizes, and playback times.
Identifies and explains the buttons and indicators on the front panel of the DVD-VCR.
Details the various input and output ports located on the rear of the DVD-VCR.
Explains the meaning of the indicators shown on the DVD-VCR's front panel display.
Instructions for connecting an antenna to the DVD-VCR for receiving TV signals.
Step-by-step guide for connecting using standard composite video and audio cables.
Instructions for connecting via S-Video cable for improved picture quality.
Guides for connecting using component video cables for high-quality images.
Details on connecting for progressive scan output for enhanced picture clarity.
Instructions for connecting the DVD-VCR to a standard stereo amplifier.
Guides for connecting to advanced audio systems using digital audio outputs.
Steps for connecting the power cord and initiating the automatic setup process.
Steps to change the on-screen menu language (English, French, Spanish).
Instructions for setting the current time automatically via antenna signal.
Instructions for setting the current time manually.
Manually setting the tuner band to Antenna or Cable TV.
Automatically scanning and storing active TV channels.
Manually adding or deleting channels from the channel list.
Configuring the RF output channel for TV connection.
Adjusting the brightness and dimming behavior of the front panel display.
Configuring the DVD-VCR to turn off automatically after a period of inactivity.
Instructions for inserting, playing, stopping, and resuming DVD playback.
Quickly navigating through chapters or tracks on a disc.
Accessing and viewing information like title, chapter, and time during playback.
Accessing and navigating disc-specific menus and title menus.
Accessing DVD functions like Information, Zoom, Bookmark, Repeat, and EZ View.
Setting up repeat playback for tracks, chapters, titles, sections, or the entire disc.
Repeating a specific segment (A-B) of the disc playback.
Slowly repeating scenes for closer study during DVD playback.
Setting the screen aspect ratio for optimal viewing on different TVs.
Choosing the desired audio track language for DVD playback.
Choosing the desired subtitle language for DVD playback.
Switching between multiple camera angles available on a DVD.
Marking specific scenes for easy retrieval later.
Magnifying parts of the screen during DVD/VCD playback.
Navigating and playing music and picture files organized in folders.
Methods for selecting parent, peer, or sub-folders containing media files.
Playing MP3 and WMA audio files from discs.
Setting up custom playback orders for audio CDs.
Viewing JPEG image files from Picture CDs.
Overview of accessing and navigating the DVD-VCR's setup menu options.
Configuring disc menu, audio, and subtitle language preferences.
Configuring audio output settings for external audio systems.
Adjusting video settings like TV aspect ratio and black level.
Restricting playback of DVDs based on their rating levels.
Defining the acceptable rating levels for DVD playback.
Modifying or resetting the parental control password.
Instructions for loading and unloading VHS tapes in the VCR.
Steps for playing back standard VHS video cassettes.
Exploring features like Frame Advance, Skip, and Repeat for VCR playback.
Adjusting tracking to remove picture noise or streaks on playback.
Indicating cassette length for accurate time remaining display.
Configuring tapes to play automatically upon insertion.
Enabling continuous playback of videotapes.
Utilizing the counter to track elapsed time and locate sequences.
Starting new recordings at specific points for smooth scene changes.
Choosing audio output modes like Left, Right, Mono, or Hi-Fi.
Using index marks to fast-forward or rewind to specific points on a tape.
Common problems and solutions for DVD-VCR operation.
Troubleshooting steps for common issues encountered with DVD playback.
Troubleshooting steps for common issues encountered with VCR playback.
Detailed technical information about the DVD-VCR's hardware and performance.
Information regarding the product's limited warranty coverage and exclusions.
To Next Page
