Anynet+ issues
Anynet+ does not work.
Check whether Anynet+ (HDMI-CEC) is set to On in MenuSETTINGS
External Device Manager.
devices again or turn your product off and on again.
I want to start Anynet+. Anynet+
(HDMI-CEC) is set to On in MenuSETTINGSExternal Device Manager.
I want to exit Anynet+. Press the SOURCE
The message “Disconnecting Anynet+ device...”
appears on the screen.
mode.
The Anynet+ device does not play. You cannot use the play function when initial setup is in progress.
To Next Page
Loading...
