71
Anynet+ issues
The connected device is not displayed.
Check whether Anynet+ (HDMI-CEC) is set to On in MenuSETTINGS
External Device Manager.
been disconnected, please repeat the device scan.
Other issue
The product smells like plastic. The plastic smell is normal and disappears over time.
Small particles are found on the edges of the product. The particles are part of the product design. The product is not defective.
When I try to change the PC resolution, a message
"The dened resolution is not currently supported."
appears.
The message "The dened resolution is not currently supported." appears if the input source
To resolve the issue, change the PC resolution to a resolution supported on the product.
There is no sound from the speakers in HDMI mode
when a DVI-HDMI cable is connected.
HDMI Black Level is not functioning properly on an
HDMI device with YCbCr output.
There is no sound in HDMI mode.
connected to the product.
To Next Page
Loading...
