32
Connecting using a cable
"
Connecting parts may differ depending on the model.
1
Connect the product to the PC using an HDMI, DP cable.
"
HDCP contents will not show on the screen if PIP Capture is set to On.
"
When the screen is black, turn off PIP Capture because some graphic cards can support
HDCP automatically.
2
Select →IMPORT→PC→HDMI, DisplayPort on the screen.
3
To control the PC from the product screen, connect the supplied USB cable to the TOUCH
port on the product.
"
If used in a multi-screen setup, make sure you have configured FLIP as the main display.
Connecting using a OPS (Sold separately)
Touchscreen may not work properly during initial OPS Windows settings. Connect a mouse and
keyboard to OPS for use during initial settings.
To Next Page
Loading...
