57
2nd 3rd
Description
Advanced Settings Configure advanced settings which includes USB Lock and Network Lock.
Enter your 6 digit PIN number. The default PIN number is "000000".
"
If you want to change the PIN number, use the Change PIN function.
"
Change the PIN to keep your device secure.
Screen Saver
Set up the sreensaver. The selected image can be used as a custom screensaver.
Touch Control Lock Run Touch Control Lock.
"
Tap and hold the screen to release Touch Control Lock.
USB Lock Set up a USB Lock. After setting up, the device will be restarted to apply the settings.
• Off / Read-only / All On
Network Lock Set up a Network Lock.
Screen Monitoring Lock Block screen images from being monitored by MagicINFO Server.
Auto Power Off Choose how long the display will stay on before turning off after no user interaction is detected.
PC module power Turns on or off to sync with OPS Power when the power is on or off.
• Synced power-on: When the Flip is turned on, the PC module is automatically turned on as well.
• Synced power-off: When the Flip is turned off, the PC module is automatically turned off as well.
No Signal/No Interaction Power
Off
Save power by turning the device off when no signals/touch interactions are received from any source.
Remote Power Control Turn Remote Power Control on or off. By activating this feature, the network connection is maintained when the product is
turned off.
Remote Management Settings Set to connect and control the Flip remotely from other devices.
• Remote Management: Restrict access to the product from other devices via the network.
• Device ID: Set a unique ID number.
• PC Connection Cable: Select the type of cable used to connect the product to a PC.
• Secure Protocol: Secure the protocol between the product and other devices.
To Next Page
Loading...
