Samsung Galaxy A22 5G - Connecting to VPN (Virtual Private Network)

98
Settings
■ Disconnecting Wi-Fi Direct

From the Home screen, → "Settings" → "Connections" →
"Wi-Fi"

→ "Wi-Fi Direct"

Tap a device name to disconnect

You can lock the Osaifu-Keitai function, do mobile payment, read/write the
NFC tag.

From the Home screen, → "Settings" → "Connections" →
"NFC/Osaifu-Keitai settings"

Tap an item to set
Item Description
NFC/Osaifu-Keitai
Lock ON/OFF
Lock NFC/Osaifu-Keitai function.
Contactless
payments
Set whether to enable the service that can be
used holding over a reader, such as Osaifu-Keitai
compatible service.

Disable all wireless connections.

From the Home screen, → "Settings" → "Connections" →
"Airplane mode"

Information
• Alternatively, tap
on the notication panel to switch setting.
• If you enable "Airplane mode", Wi-Fi, Bluetooth, etc. turn OFF. However,
you can turn them ON again during Airplane mode.

Access point for connecting the Internet (spmode.ne.jp) is already
registered. You can add or change it if necessary.
For details on sp-mode, refer to NTT DOCOMO website.
https://www.nttdocomo.co.jp/service/spmode/ (In Japanese only)
■ Checking the access point in use

From the Home screen, → "Settings" →"Connections" →
"Mobile networks" → "Access Point Names"
■ Setting an access point additionally

From the Home screen, → "Settings" →"Connections" →
"Mobile networks" → "Access Point Names" → "Add"

"Name" → Enter a name of network prole to create → "OK"

"APN" → Enter the access point name → "OK"

Enter the other items required by the network operator
• Do not change "MCC" other than 440 and "MNC" other than 10,
respectively. If they are changed, they are not displayed on the
screen.

→ "Save"
Information
• When you changed settings of MCC or MNC and access points
are not displayed, initialize the access point or set an access point
manually.
■ Initializing an access point
By initializing an access point, the settings return to the default state.

From the Home screen, → "Settings" →"Connections" →
"Mobile networks" → "Access Point Names"

→ "Reset to default" → "Reset"