Samsung Galaxy A22 5G - Data usage; Using tethering

97
Settings
■ Deleting connection of Wi-Fi network

From the Home screen, → "Settings" → "Connections" →
"Wi-Fi"

of Wi-Fi network during connecting to → "Forget"
Information
• Deleting the Wi-Fi settings also deletes the Wi-Fi network password,
requiring you to input it next time you connect to the network.
■ Setting Wi-Fi access point
• For information necessary for connection, refer to user manual of wireless
LAN access point you use. For connecting to company LAN or using Public
wireless LAN service, ask a network administrator or service provider about
the required information for connecting.
• When the wireless LAN access point is set for connecting only to the
MAC address registered device, register the MAC address of the terminal
to the wireless LAN access point. To check MAC address, from the Home
screen, you can check to tap
→ "Settings" → "About phone" → "Phone
Wi-Fi MAC address" of “Status information".

From the Home screen, → "Settings" → "Connections" →
"Wi-Fi"

"Add network"

Enter the network name → Set the security

Enter a password → "Save"
■ Setting each Wi-Fi function

From the Home screen, → "Settings" → "Connections" →
"Wi-Fi"

→ "Advanced"
Item Description
Switch to mobile
data
Set whether to switch to mobile data
communications when the Wi-Fi connection is slow
or unstable.
Turn on Wi-Fi
automatically
You can set Wi-Fi to turn on automatically at the
location you use Wi-Fi frequently.
Item Description
Detect suspicious
networks
Set whether to receive a notication when
suspicious behavior is detected on the Wi-Fi network.
Show network
quality info
Network quality information is displayed on the Wi-Fi
network list to use available.
Manage networks Manage saved Wi-Fi networks.
Wi-Fi control
history
Display apps that recently turned Wi-Fi ON or OFF.
Hotspot 2.0 Set whether to automatically connect to Hotspot
2.0 compatible Wi-Fi access point within the area
without the Wi-Fi access point set.
Install network
certicates
Install a network certicate.
■ Using static IP address
You can set the terminal to connect to Wi-Fi network using the static IP
address.

From the Home screen, → "Settings" → "Connections" →
"Wi-Fi"

Tap the Wi-Fi network to connect → "Advanced"

Tap "IP settings" eld → "Static"

Set required items

"Connect"
■ Using Wi-Fi Direct
You can exchange data by connecting Wi-Fi Direct compatible devices.

From the Home screen, → "Settings" → "Connections" →
"Wi-Fi"

→ "Wi-Fi Direct"

Tap a searched device name
• When the connection is accepted on the searched device, the
terminal will be connected via Wi-Fi Direct.