Samsung GALAXY S3 - Wi-Fi Direct

Connections 127
Adding a Wi-Fi Network Manually
1. From the Home screen, touch Menu ➔ Settings ➔
Connections ➔ Wi-Fi . The Wi-Fi options screen
displays. For more information, refer to “Accessing
Settings” on page 139.
2. Slide
Wi-Fi to the right to turn on Wi-Fi.
3. Touch
Add Wi-Fi network , then enter the following
values:
• Network SSID : Enter the name of the WAP (Wireless Access
Point).
•Security : Select the type of security used by the WAP.
•Password : If the WAP is secured, enter the password or key.
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other directly
through Wi-Fi, without a Wi-Fi network or hotspot, and
without having to set up the connection. For example, some
printers support Wi-Fi Direct, and you can print from the
phone using Wi-Fi Direct.
Turning Wi-Fi Direct On or Off
1. From the Home screen, touch Menu ➔ Settings ➔
Connections ➔ Wi-Fi .
2. Slide
Wi-Fi to the right to turn Wi-Fi ON.
Wi-Fi must be on to use Wi-Fi Direct.
3. Touch
Wi-Fi Direct . The Wi-Fi Direct screen displays,
and the phone scans for available Wi-Fi Direct devices
and lists them under
Available devices .
Connecting to Wi-Fi Direct Devices
1. First, enable Wi-Fi on your device. From the Home
screen, touch
Menu ➔ Settings .
2. Slide
Wi-Fi to the right to turn Wi-Fi ON.
Wi-Fi must be on to use Wi-Fi Direct.
3. Enable Wi-Fi Direct on the other device(s). Consult the
other device’s documentation for more information.
ON
ON
ON
ON
ON
ON