62
Answering/Ending Calls
Manage settings for answering and ending calls.
From the
Call settings
screen, touch
Answering/ending
calls
. Configure the following options:
• The home key answers calls
: When enabled, press
Home
to answer an incoming.
• Voice control
: When enabled, you can answer an incoming
call using voice commands. (For more information, refer to
“S
Voice”
on page 119.)
• The power key ends calls
: When enabled, press
Power/Lock
to end a call.
Turn Off Screen During Calls
When enabled, the screen automatically turns off during
phone calls, and the proximity sensor on the front of the
device is used to turn the screen back on when the device is
moved or brought close to another surface, such as when
you move the device to your ear.
From the
Call settings
screen, touch
Turn off screen
during calls
to enable or disable the option.
Call Alerts
Set options for sounds and vibrations to occur during calls.
From the
Call settings
screen, touch
Call alerts
. The
following options are available:
• Call vibrations
: Configure the conditions in which the phone
vibrates for different call alerts.
–
Vibrate on connection to network
:
The phone vibrates when
it connects to the network.
–
Call-end vibration
:
The phone vibrate when the other caller
ends the call.
• Call status tones
: Touch this options to enable/disable sounds
to play during calls.
–
Call connect tone
: The phone plays a tone when the other
caller answers a call.
–
Minute minder
: A tone plays once per minute during a call.
–
Call end tone
: The phone plays a tone when the other caller
ends the call.
• Alerts on call
: When enabled, alarms and new messages play
during phone calls. When disabled, these alerts are muted
during a call.
To Next Page
Loading...
