Samsung GALAXY S3 - Internet

Connections 129
Note: When connected, the Bluetooth connected icon
displays in the Status Bar. If you receive a new request
for connection while connected with a Bluetooth
headset, a new Bluetooth icon displays at the left of the
Status bar and Notifications displays the connection
request.
1. Activate the target device’s discoverable mode.
2. Turn on Bluetooth from the phone (see “Turning
Bluetooth On or Off” on page 128). A list of detected
devices displays.
3. From the list of detected devices, touch the target
device the phone attempts to automatically pair with
the target device.
If automatic pairing fails, then follow the prompts to
complete manual pairing:
• Enter a PIN for the target device and touch OK .
Tip: Some devices use a default pass code of 0000. Refer to
the target device’s user manual for more information.
• When prompted to connect with the target device, touch OK to
complete the connection or touch
Cancel to retain the
pairing only.
Connecting with a Bluetooth Device
1. Turn Bluetooth ON. (See “Turning Bluetooth On or Off”
on page 128.)
2. From the Home screen, touch
Menu ➔ Settings ➔
Connections ➔ Bluetooth . The Bluetooth screen
displays.
3. Under
Available devices , touch a previously paired
device. The device connects with the phone.
Internet
This phone is equipped with a full HTML Browser, which
allows you to access the Internet.
 From the Home screen, select Internet . Your
Wireless Provider’s mobile home page displays in the
Internet screen.
Note: This phone also comes with the Google Chrome mobile
browser. (For more information, refer to “Chrome” on
page 106.)