Samsung GALAXY S3 - Portable Wi-Fi Hotspot

Connections 133
S Beam
When S Beam is turned ON, you can beam files to another
NFC-capable device by holding the devices close together.
You can beam images and videos from your gallery, music
files from your music player, and more.
Turning S Beam On or Off
1. Turn NFC ON (see “NFC” on page 132). NFC must be
ON to use S Beam.
2. From the Home screen, touch
Menu ➔ Settings ➔
Connections ➔ S Beam
3. Slide
S Beam to the right to turn S Beam ON.
Using S Beam
1. Turn S Beam ON. (See “Turning S Beam On or Off” .)
2. Launch
Camera , Music Player , or Gallery
(See “Applications and Widgets” on page 102). When
using Gallery, you can select multiple files to S Beam.
3. Place the phone back-to-back with the device to
receive your “beamed” content, then touch the screen
on the phone. The receiving device prompts the user to
accept your “beamed” content.
4. Once the user of the receiving device accepts your
“beamed” content, it displays on the screen of
that device.
Portable Wi-Fi Hotspot
Use Portable Wi-Fi hotspot to share your phone’s access to
your Wireless Provider’s Internet connection with up to 5
other devices through Wi-Fi connections.
Note: Portable Wi-Fi hotspot requires a subscription to your
Wireless Provider’s applicable data service.
Portable Wi-Fi hotspot consumes battery power and
uses data service.
While Portable Wi-Fi hotspot is active, your phone’s
applications use the Portable Wi-Fi hotspot data feature
allowance.
ON
ON