47
Wi-Fi and Wi-Fi DirectSettings
Wi-Fi Settings
The Wi-Fi settings menu allows you to set up many
of your device’s advanced Wi-Fi services.
1. From a Home screen, tap
Apps >
Settings.
2. Tap Wi-Fi, and then tap ON/OFF to turn Wi-Fi on.
3. Tap MORE for options:
•
Add network: Manually add a Wi-Fi network.
•
WPS push button: Set up a connection to a
WPS (Wi-Fi Protected Setup) router or other
equipment.
•
WPS PIN entry: View the PIN used by your
device to set up a PIN-secured connection
to a Wi-Fi router or other equipment (not
configurable).
•
Keep Wi-Fi on during sleep: Specify when to
disconnect from Wi-Fi.
•
Always allow scanning: Allow Google location
service and other apps to scan for networks,
even when Wi-Fi is turned off.
•
Install network certificates: Install
authentication certificates.
Wi-Fi Status Indicators
These Status bar icons show your current Wi-Fi
connection status:
Displays when Wi-Fi is connected, active,
and communicating with a Wireless Access
Point (WAP).
A Wi-Fi access point is available, but your
device is not connected to it. It may also
display if there is a communication issue
with the target Wireless Access Point
(WAP).
Wi-Fi Direct
Wi-Fi Direct allows direct device-to-device
connections via Wi-Fi, without having to connect to a
Wi-Fi network.
1. From a Home screen, tap
Apps >
Settings.
2. Tap Wi-Fi, and then tap ON/OFF to turn Wi-Fi on.
Wi-Fi must be on to configure settings.
3. Tap Wi-Fi Direct. Your device automatically
scans for nearby Wi-Fi Direct devices.
4. After scanning for devices, select a device,
and then follow the prompts to complete the
connection.
Wi-Fi Direct Status Indicator
When your device is connected to another device
using Wi-Fi Direct,
displays in the Status Bar.
To Next Page
Loading...
