72
Using the Channel Menu
5
5 Using the Channel Menu
5.1.4 Manual Tuning
MENU
[] Channel Manual Tuning ENTER
[ ]
Scans for a channel manually and stores in the product.
z If a channel is locked, the PIN input window appears.
z According to the channel source, Manual Tuning may be supported.
z Digital Channel Tuning: Scans for a digital channel manually and stores in the product. Press the
New button to search the digital channels. When scanning has finished, a channel is updated in the
channel list.
- When selecting Aerial Air: Channel, Frequency, Bandwidth
- When selecting Aerial Cable: Frequency, Modulation, Symbol Rate
z Analogue Channel Tuning: Scans for an analogue channel. Press the New button to search the
channels by adjusting the Programme, Colour System, Sound System, Channel, Search.
5.1.5 Transfer Channel List
MENU
[] Channel Transfer Channel List ENTER
[ ]
Imports or exports the channel map. You should connect a USB storage to use this function.
The PIN number input screen appears. Enter your 4 digit PIN number.
z Import from USB: Import channel list from USB.
z Export to USB: Export channel list to USB.
5.1.6 Fine Tune
MENU
[] Channel Fine Tune ENTER
[ ]
If the signal is weak or distorted, fine tune the channel manually.
(Analogue channels only)
z Fine tuned channels are marked with an asterisk “*”.
z To reset the fine-tuning, select Reset.
To Next Page
