To Next PageTo Next PageWhy is my Samsung HT-D350 Home Theater System remote control not working?
The remote control might not work because it's being operated outside its effective range, the batteries are dead, or the incorrect mode (DVD RECEIVER/TV) is selected.
How to reset my Samsung HT-D350 if it is not working?
Press and hold the STOP button on the remote control for longer than 5 seconds with no disc inserted to reset the system. Note: Using the RESET function will erase all stored settings, so only use this if necessary.
Why is there no sound coming from my Samsung Home Theater System?
There could be several reasons for the lack of sound. No sound is heard during fast, slow, and step motion playback. Also, check the speaker connections and speaker setup. Lastly, the disc might be severely damaged.
What to do if playback does not start on Samsung Home Theater System?
Playback might not start for several reasons. DVD discs purchased from abroad may not be playable, so check the region number of the DVD. Also, CD-ROMs and DVD-ROMs are not playable on this device. Finally, ensure the rating level is correct.
Why does sound only come from some speakers on my Samsung HT-D350?
Sound may only come from a few speakers for a few reasons. Some DVD discs only output sound from the front speakers. Ensure all speakers are properly connected and the volume is adequately adjusted. When listening to a CD, radio, or TV, sound is often output to the front speakers only; select "PROLOG" by pressing PL II (Dolby Pro Logic II) on the remote control to use all six speakers.
Why is my Samsung HT-D350 disc spinning but there's no picture?
If the disc is rotating but there's no picture, check if the TV is powered on and whether the video cables are properly connected. Also, the disc might be dirty, damaged or poorly manufactured.
Why Dolby Digital 5.1 CH Surround Sound is not produced on Samsung HT-D350?
Dolby Digital 5.1 CH Surround Sound may not be produced if the disc doesn't have the "Dolby Digital 5.1 CH" mark or if the audio language isn't correctly set to Dolby Digital 5.1-CH in the information display.
What to do if my Samsung Home Theater System disc is rotating but there's no picture, or the picture quality is poor?
Check if the TV power is on, ensure the video cables are properly connected, and inspect the disc for dirt or damage. A poorly manufactured disc may also cause this issue.
Why can sound only be heard from a few speakers on my Samsung HT-D350 Home Theater System?
On certain DVD discs, sound is output only from the front speakers, so check if the speakers are connected properly. Also, adjust the volume. When listening to a CD, radio, or TV, sound is output to the front speakers only; select "PROLOG" by pressing PL II (Dolby Pro Logic II) on the remote control to use all six speakers.
Why is Dolby Digital 5.1 CH Surround Sound not working on my Samsung HT-D350?
Dolby Digital 5.1 CH Surround Sound is produced only if the disc is recorded with 5.1 channel sound, so check for the "Dolby Digital 5.1 CH" mark on the disc. Also, verify that the audio language is correctly set to Dolby Digital 5.1-CH in the information display.
General| Type | Home Theater System |
|---|---|
| Number of Channels | 5.1 |
| Total Output Power | 330 W |
| DVD Playback | Yes |
| HDMI Output | Yes |
| USB Playback | Yes |
| FM Radio | Yes |
| Audio Decoding Formats | Dolby Digital, DTS |
| Video Upscaling | Yes |
| Anynet+ (HDMI-CEC) | Yes |
| Optical Digital Audio Input | Yes |
| Wall Mountable | Yes |
| Playable Disc Types | DVD, CD |
Important instructions to reduce the risk of electric shock and personal injury.
Important guidelines for safe and proper use, preventing damage to the product.
Important considerations and limitations when connecting USB devices for media playback.
Identification and description of controls and indicators on the front of the unit.
Explanation of the functions of each button on the remote control.
Identification and description of ports and connectors on the rear of the unit.
Guidance on positioning and connecting the speaker system for optimal sound.
Detailed steps for connecting speaker wires to the unit's terminals correctly.
Three methods (HDMI, Component, Composite) for connecting the product to a TV.
Guides for connecting external analogue (AUX) and digital (OPTICAL) audio sources.
Initial setup process for language and TV aspect when first powering on the unit.
How to navigate and change settings within the product's menu system.
Configuring speaker size and test tone for optimal audio output.
Step-by-step guide on inserting, playing, and stopping discs.
Instructions for playing audio CDs, MP3, and WMA discs.
Detailed explanation of various playback controls like search, skip, and slow motion.
How to play media files from USB devices like MP3 players and cameras.
