Choose one of the three methods for connecting to a TV.
METHOD 1 : HDMI
Connect an HDMI cable (supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack
on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable (not supplied)
from the COMPONENT OUT (P
R
, P
B
and Y) jacks on the back of the product to the Component Video Input
jacks on your TV.
METHOD 3 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack
on your TV.
NOTE
Resolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 20 for the resolution
setting.
This product operates in Interlace scan mode 480i(576i) for component/composite output.
After making the video connection, set the Video input source on your TV to match the corresponding Video
output mode on your product.
Turn this product on rst before you set the video input source on your TV. See your TV owner's manual for
more information on how to select the TV's Video Input source.
CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
✎
`
`
`
!
`
To Next Page
Loading...
