03 Setup
Press the POWER button when it is plugged in
TV for the rst time.
Initial Setting screen will be displayed.
Move Select Return
Initial settings I On-Screen Language
Select a language for the on-screen displays.
English
한국어
Nederlands
Français
Deutsch
Italiano
Press the ▲▼ buttons to select the desired
language, then press the ENTER button.
Press the ENTER button to select Start button.
Press the ▲▼ buttons to select desired TV Aspect,
then press the ENTER button.
NOTE
If you have not selected a preferred language in
the initial settings, you will see a language
selection window next time you turn on the
product.
Your language selection will apply to all menus:
On-Screen Menu, Disc Menu, Audio, Subtitle.
If you want to move to the previous screen, press the
RETURN button.
Once you select a menu language, you can change it by
pressing the STOP (@) button on the remote control for
more than 5 seconds with no disc inserted.
When the Initial Setting screen does not appear, refer to
the Initial Setting. (see page 22)
✎
`
`
`
`
`
Setting the Setup menu
The access step may differ depending on the selected
menu. The GUI (Graphical User Interface) in this
manual may differ, depending on the rmware version.
1
2
3
4
1
MENU BUTTON : Display the home menu.
2
ENTER / DIRECTION BUTTON
Move the cursor and select an item.
Select the currently selected item.
Con rm the setting.
3
RETURN BUTTON : Return to the previous
setup menu.
4
EXIT BUTTON : Exit the setup menu.
Function DVD/CD
Settings
Press the POWER button.
Press the
_+
buttons to select Settings, then
press the ENTER button.
Press the
$%
buttons to select the desired
menu, then press the ENTER button.
Press the
$%
buttons to select the desired sub-
menu, then press the ENTER button.
Press the
$%
buttons to select the desired
item, then press the ENTER button.
Press the EXIT button to exit the setup menu.
Setup
To Next Page
Loading...
