S/W LEVEL
You can also press the S/W LEVEL button on the
remote control and use the _ or +
buttons to adjust the level of subwoofer.
Press the S/W LEVEL button.
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio
mode, P.Bass or MP3 Enhancement function.
Press the
PL II button.
MP3 ENHANCE ON ➞ POWER BASS
ON ➞ POWER BASS OFF ➞ MUSIC ➞
MOVIE ➞ PROLOG ➞ MATRIX ➞ STEREO
NOTE
When selecting Pro Logic II mode, connect
your external device to the AUDIO INPUT jacks
(L and R) on the product. If you connect to only
one of the inputs (L or R), you cannot listen to
surround sound.
The Pro Logic II function is only available in
Stereo mode.
The Pro Logic II function is not available while
playing AC3 signal in 2.1 channel mode.
Using buttons on the Remote Control
Press the FUNCTION button to select FM.
Tune in to the desired station.
Preset Tuning 1 : You must rst add a desired
frequency as a preset. Press the STOP (@)
button to select PRESET and then press the
TUNING(
) button to select the preset
station.
Manual Tuning : Press the STOP (@) button to
select MANUAL and then press the TUNING
✎
`
`
`
~
~
( ) button to tune in to a lower or higher
frequency.
Automatic Tuning : Press the STOP (@) button
to select MANUAL and then press and hold the
TUNING( ) button to automatically search the
band.
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the
sound switches between STEREO and
MONO.
In a poor reception area, select MONO for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory
Press the FUNCTION button to select FM.
Press the TUNING
(
,,.)
buttons
to
select <89.10>.
Press the TUNER MEMORY button.
Number ashes on the display.
Press the
,,.
buttons
to select
preset number.
You can select between 1 and 15 presets.
Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before
number disappears from the display.
Number disappears from the display and the
station is stored in memory.
To preset another station, repeat steps 2 to 5.
~
~
~
~
~
~
~
To Next Page
Loading...
