EasyManua.ls Logo

Samsung HT-TX250 - Connecting Audio from External Components; Analog and Digital Audio Inputs; Cooling Fan Information

Samsung HT-TX250
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
GB
CONNECTIONS
23
OPTICAL : Rear Panel
Optical Cable
(not supplied)
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Set-Top Box.
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
2
Press the AUX button on the remote control to select <D.IN>.
You can also use the FUNCTION button on the main unit.
The mode switches as follows
: DVD D.IN AUX 1 AUX 2 USB FM
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the
temperature inside the unit may rise and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes
are covered with a newspaper or cloth, heat may build up inside the unit and re may
result.)
Connecting Audio from External Components
M
IC
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either left
or right.
AUX1 : Side Panel AUX2 : Rear Panel
Audio Cable
(not supplied)
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player
1
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 player.
2
Press the AUX button on the remote control to select <AUX1> input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD
D.IN
AUX1
AUX2
USB
FM
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
1
Connect AUX IN 2 (Audio) on the Home Theater to Audio Out on the external analog component.
Be sure to match connector colors.
2
Press the AUX button on the remote control to select <AUX2> input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD
D.IN
AUX1
AUX2
USB
FM
You can connect the Video Output jack on your VCR to the TV, and connect the Audio Output jacks on the VCR
to this product.

Table of Contents

Related product manuals