GB
MISCELLANEOUS
5757
MISCELLANEOUS
Listening to Radio
Remote Control
1 Press the TUNER button to select the FM band.
2 Tune in to the desired station.
Automatic Tuning 1 : When the #,$
button
is pressed, a preset broadcast station is
selected.
Automatic Tuning 2 : Press the and hold .
,
, button to automatically
search for active broadcasting stations.
Manual Tuning : Briefl y press the
.
,
, button
to increase or decrease the
frequency incrementally.
Main Unit
1 Press the FUNCTION button to select the FM band.
2 Select a broadcast station.
Automatic Tuning 1 : Press the STOP () button to select PRESET and
then press the
#,$
button to select the preset station.
Automatic Tuning 2 : Press the STOP () button to select <MANUAL>
and then press the and hold
#,$
button to automatically search the band.
Manual Tuning : Press the STOP () button to select <MANUAL> and
then briefl y press the
#,$
button to tune in to a lower or higher frequency.
d Press the MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
Each time the button is pressed, the sound switches between (STEREO) and
(MONO).
In a poor reception area, select (MONO) for a clear, interference-free
broadcast.
56
Settings (Con’t)
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
1 Press the PL II MODE button to select <MUSIC> mode.
2
Press the PL II EFFECT button to select <P> (PANORAMA), then press
the Cursor
◄,►
button to select the desired effect setting.
You can select either 0 or 1.
This mode extends the front stereo image to include the surround
speakers for an exciting <wraparound> effect with side wall imaging.
3 Press the PL II EFFECT button to select <C> (C-WIDTH), then press
the Cursor ◄,►button to select the desired effect setting.
You can select between 0 and 7.
This sets the width of the center image. The higher the setting, the less
sound comes from the center speaker.
4 Press the PL II EFFECT button to select <D> (DIMENS), then press
the Cursor ◄,► button to select the desired setting.
You can select between 0 and 6.
Incrementally adjusts the sound fi eld (DSP)from the front or rear.
When playing a DVD disc encoded with two or more channels, multi-channel
mode will be selected automatically and the
(Dolby Pro Logic II) button
does not work.
•
To Next Page
Loading...
