50
GB
SETUP
51
Setting the Audio
You can adjust the balance and level for each speaker.
MOVE ENTER EXITRETURN
MOVE CHANGE EXITRETURN
1 In Stop mode, press the MENU button.
2
Press the Cursor ▼
button to move to <Audio> and then press the ENTER button.
3
Press the Cursor ▼
button to move to <SOUND EDIT> and then press the
ENTER button.
4 Press the Cursor ▲,▼ button to select and adjust the desired item.
Press the Cursor ◄,► button to adjust the settings.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
Press the SOUND EDIT button and then press the Cursor ◄,► button.
Adjusting Front/Rear Speaker Balance
You can select between 0 and –6 and OFF.
The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
The volume level can be adjusted in steps from +6dB to –6dB.
The sound gets louder as you move closer to +6dB and quieter as you get closer
to -6dB.
•
•
•
•
Settings (Con’t)
Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
1 In Stop mode, press the MENU button.
2
Press the Cursor ▼
button to move to <Audio> and then press the ENTER button.
3
Press the Cursor ▼
button to move to <TEST TONE> and then press the
ENTER button.
The test tone will be sent to L C R SR SL SW in order.
If the ENTER button is pressed again at this time, the test tone will stop.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
MOVE ENTER EXITRETURN
STOP EXIT
Alternate method : press the TEST TONE button on the remote.
Press the TEST TONE button.
Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.
Use this function to check that each speaker is correctly connected
and that there is no problem.
When HDMI AUDIO is on (audio is produced through TV
speakers), the TEST TONE function is not available.
d To end the test tone, press the TEST TONE button again.
Multi-Channel Pro Logic Mode
Start
L: Front Speaker (L) C: Center Speaker SW: Subwoofer
R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)
To Next Page
Loading...
