Samsung HT-TX250 - Speaker Installation; Speaker Stand Assembly; Wireless Amplifier Connection; Wireless Module Setup

14
GB
CONNECTIONS
15
Connecting the Optional Wireless Receiving Amplifi er
To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and
TX card from your Samsung retailer.
When you have Purchased the Wireless Receiving Module (SWA-3000)
Front Speaker (R)
Rear Speaker (L)
Subwoofer
Center Speaker
Front Speaker (L)
Rear Speaker (R)
WIRELESS RECEIVER MODULE
Front Speaker (L)
Rear Speaker (L)
Subwoofer
Center Speaker
Front Speaker (L)
Rear Speaker (R)
WIRELESS RECEIVER MODULE
HT-X250
HT-TX250
Speaker Installation
How to Install the Speaker on the Stand
1 Turn the STAND upside-down and connect it to the
STAND BASE.
2 Insert two screws (A) into the two holes marked with
arrows using a screwdriver as shown in the illustration.
3 Insert a screw (B), into the hole on the rear of the Speaker
STAND.
4 Connect the assembled stand to the SPEAKER.
5 Insert another screw (B) into the hole on the rear of the
speaker using a screwdriver as shown in the illustration.
6 This is the SPEAKER successfully assembled with the
Stand.
Make sure that the speaker is installed on a fl at and stable
area. Otherwise it may be easily knocked over.
•
Screw (B)Screw (A)STAND BASESTANDSPEAKER
Speaker Components (HT-TX250 only)
3
4
1
2
5
6