ConnectingAudiofrom ExternalComponents
AUX1 : Front Panel (iPod only)
Audio Cable I
AUX1 : Front Panel
AUX1 • Connecting an External Analog Component/iPod MP3
You can listen to the audio from an External Analog Component/iPod MP3 player through the main unit.
1 Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external analog component/
iPod MP3.
2 Press the AUX button on the remote control to select <AUXI> input.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows • DVD/CD -_ DIGITAL IN -* AUX 1 -_ AUX 2 -_ USB -_ FM,
• When the unit is powered on and you connect an iPod MP3 player, the unit wilI charge your iPod's battery.
AUX2 : Rear Panel
I Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either
left or right.
AUDIO OUT
OPTICAL : Rear Panel
_, ,_,_,
/A
Y
z
4/,°:',:°:t,':'o:)
AUX2 • Connecting an External Analog Component
Analog signal components such as a VCR.
1 Connect AUX IN 2 (Audio) on the HomeTheater to theAudio Out of the external analog component.
• Be sure to match connector colors.
2 Press the AUX button on the remote control to select <AUX2> input.
• You can also use the FUNCTION button on the main unit.
The mode switches as foltows " DVD/CD -* DIGITAL IN -* AUX 1 -* AUX 2 -* USB -* FM.
• You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to
this product.
OPTICAL • Connecting an External Digital Component
Digital signal components such as a Set-Top Box.
1 Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital
component.
2 Press the AUX button on the remote control to select <DIGITAL IN>.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows • DVD/CD -_ DIGITAL IN -_ AUX 1 -* AUX 2 -* USB -* FM.
18 19
To Next Page
Loading...
