Samsung HW-H751 - Connecting to the AUX IN Terminal

17
16
ENG
CONNECTIONS
CONNECTING TO THE AUX IN
This section explains how to connect the Soundbar to an audio device using the AUX IN
terminal.
AUX IN
Earphones
jack
Audio Cable
Smart device
1. Press the ( ) button on the main unit’s front panel or the (SOURCE) button on
the remote control to select the AUX mode.
2. Connect the audio cable to the Soundbar’s AUX IN and the smart device’s AUX OUT.
3. Select the desired track to play from your smart device’s music list.
4. The Soundbar plays the track you selected.
ASSEMBLING THE CABLE CLIP
DC 24V DC 24V
Attach the cable clip to the
unit as shown, and then run
the cables through the clip to
keep them neat.