24
FUNCTIONS
● The NFC function is implemented in Android v4.1.2 Jelly Bean and later operating
systems.
- To make NFC connections, your smart device needs both Android OS 4.1.2
Jelly Bean or later and the NFC tag for NFC function execution. You also need
to download the "Samsung NFC Connection" application from the Google Play
store and install it on your smart device. For further details, please refer to the
smart device’s user manual.
● The location of the NFC antenna is different in different devices. Confirm the
location of your smart device’s antenna in the device's user manual before
attempting to pair it with the Soundbar.
● If your smart device is in a thick housing or case, the NFC connection may not be
stable.
● The N-mark is a trade mark or registered trade mark of the NFC Forum Inc. in the
United States and other countries.
● If you have trouble with an NFC connection
- Actually touching your smart device to the NFC label can cause NFC
connection failure.
- If the “Empty tag” error is displayed on the smart device, please try again.
- Check whether your smart device’s antenna is close enough to the NFC logo.
● If you turn off the Soundbar when the Network Standby On feature is ON, and
then try to connect a Bluetooth device that has been previously connected using
NFC, the Soundbar will turn on automatically when the device connects. To set
the Network Standby On feature, see page 28.
To Next Page
Loading...
