Samsung HW-J470 - Page 32

Installing the Wall Mount
1. Place the installation guide against the wall
surface .
•
The i nstallation guide must be level.
• Install at least 2 inches (5 em) below the TV, if
the TV is mounted on the wall .
¥' If the wall is not strong enough to support the
unit,
reinforce the wall or install the unit on a
different wall that
can support the unit's
weight.
¥' Purchase and use the fixing screws or anchors
appropriate for the kind of wall you have
(plaster board, iron board, wood, etc.) .
¥' Purchase wall mount1ng screws according to the
type and thickness of the wall you will mount
the
Soundbar on .
-
D1ameter : M 5
-
Length : 1 3/8 inches (35 mm) or longer
recommended .
2
inches
(5 em) or more
3900mm
2. Mark the location where the screws will go
through on the wall using a pen, and then
remove the Installation guide .
----~ --~
_ ........ -
-··
3. Fasten the wall mounts and screws to the
marked locations .
•
The left and right mounts are different shapes .
4. Secure the two holder screws to the screw holes
on the back of the Soundbar's main body, one
on the left and one on the right.
5. Insert the USB Cable into the back of the
Sound bar before installing it on the wall.
Using the Sound bar with Wall Mount
@ <!)
[Wall Mounting the Soundbar]
6. Set the holder screws on the back of the
Sound bar into the grooves of the wall mount.
For safe installation, make sure to push the
holder
screws all the way to the bottom of the
grooves .