9
ENG
DESCRIPTIONS
REMOTE CONTROL
Repeat
Press to set the Repeat function during music playback from a USB device.
OFF - REPEAT : Cancels Repeat Playback.
TRACK - REPEAT : Repeatedly play a track.
ALL - REPEAT : Repeatedly play all tracks.
RANDOM - REPEAT : Plays tracks in random order.
(A track that has already been played may be played again.)
Mute
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
SOURCE
Press to select a source connected to the Soundbar.
Skip Forward
If there is more than one file on the device you are playing, and you
press the $ button, the next file is selected.
SOUND CONTROL
Press to select TREBLE, BASS, or AUDIO SYNC. Then, use the
#
,
$
buttons to adjust the Treble, Bass volume from -6 to +6.
Press and hold the SOUND CONTROL button for about 5 seconds to adjust
the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz,
2.5KHz, 5KHz, 10KHz and SW are selectable and each can be adjusted to
a setting between -6 and +6.
If the Soundbar is connected to a digital TV and the video appears out of
sync with the audio, press the SOUND CONTROL button to sync the audio
with the video. Use the
#
,
$
buttons to set the audio delay between
0 ms and 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync
function may not available.
Ɣ Soundbar is a Samsung proprietary name.
Ɣ Operate the TV using the TV's remote control.
AUTO POWER
Auto Power Link: Synchronizes the Soundbar to a connected Digital
Optical source via the Digital Optical jack so it turns on automatically
when you turn on your TV.
(Auto Power Link : Default OFF, ON-Anynet+ / OFF-POWER LINK or
OFF-Anynet+ / ON-POWER LINK ). The Anynet+ function lets you
control the Soundbar with the remote from an Anynet+ compatible
Samsung TV. The Soundbar must be connected to the TV via an HDMI
cable.
* Anynet+:
Press the AUTO POWER button to turn the Anynet+
function on or off.
To Next Page
Loading...
