Why does my Samsung Jet Bot VR30T85 Jet Bot cross No-go Zones?
If the Samsung Vacuum Cleaner Jet Bot does not detect and crosses No-go Zones, it may be because the Jet Bot does not start cleaning from the Clean Station. If this is the case, the set No-go Zones function will not work.
How to fix Samsung Jet Bot VR30T85 Vacuum Cleaner Jet Bot not working at all?
If your Samsung Vacuum Cleaner Jet Bot isn't working, here are a few things to check: * Make sure the power switch is on. * Check if the Status Indicator is on. * If the Status Indicator is red, the battery may be depleted. Manually place the Jet Bot on the Clean Station to charge it. Note that when the battery is completely discharged, the buttons on the Jet Bot will not work until it has charged for about 10-20 minutes.
Why is my Samsung Jet Bot VR30T85 Vacuum Cleaner Jet Bot not working?
Your Samsung Vacuum Cleaner Jet Bot may not be working because the power switch is off, the Status Indicator is off, or the battery is depleted. If the Status Indicator is red, place the Jet Bot manually on the Clean Station to charge it. Note that when manually charging due to complete battery discharge, the buttons may not work until charging is partially complete (about 10-20 minutes), at which point the Status Indicator will turn on and the buttons will function again.
Why my Samsung Jet Bot VR30T85 Vacuum Cleaner Jet Bot cannot find the Clean Station?
If your Samsung Vacuum Cleaner Jet Bot cannot find the Clean Station, check for a power failure or if the power plug is unplugged. Also, remove any obstacles around the Clean Station. Ensure there isn't any foreign matter on the charging terminals; if there is, clean it off.
What to do if my Samsung Jet Bot VR30T85 Jet Bot crosses the boundary?
If the Samsung Vacuum Cleaner Jet Bot does not detect the Boundary Marker and crosses the boundary, make sure the Boundary Markers are attached in a ( ) shape at 15 cm before the locations where the Jet Bot should not cross.
What to do if Samsung Vacuum Cleaner Jet Bot crosses the boundary?
To prevent your Samsung Vacuum Cleaner Jet Bot from crossing boundaries, ensure the Boundary Markers are attached in a ( ) shape, 15 cm before the locations where the Jet Bot should not cross.
Why is a response delayed when controlling my Samsung Jet Bot with a smartphone?
If the Jet Bot and the smartphone are not connected to the same wireless router, a response can be delayed depending on the network environment.
Why can't I log into the SAMSUNG account for my Samsung Jet Bot VR30T85?
Check your ID and password on the screen of the SAMSUNG account.
Why can't I install the SmartThings App for my Samsung Jet Bot VR30T85?
The SmartThings App requires Android OS 7.0 or later, or iOS 12.0 or later. Also, standard installation and use are not guaranteed for rooted smart devices. The supporting OS version for the SmartThings App may change later.
Why does my Samsung Jet Bot VR30T85 Vacuum Cleaner Jet Bot not detect the Boundary Marker?
If your Samsung Vacuum Cleaner Jet Bot does not detect the Boundary Marker and crosses the boundary, make sure the Boundary Markers are attached in a ( ) shape at 15 cm before the locations where the Jet Bot should not cross.
General information about product safety and user responsibility.
Defines the meaning of safety symbols used in the manual.
Important safety rules for operating the Jet Bot and Clean Station.
Specific safety guidelines for the Clean Station.
Specific safety guidelines for the Jet Bot unit.
Safety precautions concerning power cords and electrical connections.
Essential safety checks before operating the Jet Bot.
Safety measures during Jet Bot operation.
Safety guidelines for cleaning and maintaining the device.
Step-by-step instructions for setting up the Clean Station.
Instructions for initial charging and basic charging procedures.
Troubleshooting common problems with docking and recharging.
Basic operation of the Jet Bot, including power and cleaning start/stop.
How to turn on/off, start, stop, and manage sleep mode for the Jet Bot.
Explanation of LED status indicators on the Jet Bot and Clean Station.
Details on cleaning modes, suction power, and repeat cleaning options.
Overview of extra features like energy-saving and scheduled cleaning.
Guide on placing boundary markers to restrict Jet Bot movement.
Visual identification of Jet Bot and Clean Station components.
Steps for emptying and cleaning the Jet Bot's dustbin.
Instructions for removing and cleaning the Jet Bot's main brush.
How to clean sensor windows and driving wheels.
Methods for cleaning the Jet Bot's spin brush.
Procedures for replacing the dust bag and cleaning the fine dust filter.
Guide to setting up the wireless router for the SmartThings App.
Instructions for downloading and installing the SmartThings App.
Steps to create or log in to a SAMSUNG account for the app.
How to connect the Jet Bot to the SmartThings App.
Information on automatic software updates for the Jet Bot.
Overview of monitoring, control, and setting features in the SmartThings App.
Important notes and cautions regarding operation and installation.
Precautions and best practices for using the Jet Bot battery.
Steps to diagnose and resolve typical Jet Bot issues.
Resolving issues when the Jet Bot is not working or stops.
Addressing problems with weak suction or navigation failures.
Resolving issues with boundary detection and cleaning path.
Troubleshooting map saving errors and room recognition.
Resolving issues with dust emptying and intelligent power control.
Resolving problems with SmartThings App connection and setup.
Steps to resolve product registration errors.
Addressing offline app messages and map saving problems.
Resolving slow responses when controlling the Jet Bot via smartphone.
Information regarding open source software used in the product.
Instructions on how to reset the Jet Bot to factory default settings.
Detailed technical specifications for the Jet Bot.
Technical specifications for the Clean Station unit.
Contact details for Samsung customer support and website.
General| Battery Type | Lithium-ion |
|---|---|
| Battery Life | 90 minutes |
| Charging Time | 240 minutes |
| Connectivity | Wi-Fi |
| Auto Recharge | Yes |
| Type | Robot Vacuum |
| Navigation | LiDAR Navigation |
| App Compatibility | SmartThings |
| Smart Features | Smart Control |
| Cleaning Modes | Auto, Spot |
To Next Page