Why Jet Bot does not recognize pet waste but sucks it up for Samsung Jet Bot VR50T95735W/SA?
If the pet waste is in the blind spot of the Object Recognition sensor’s view angle, it may not be recognized. If the size of pet waste is smaller in diameter than about 2 cm x 3 cm wide, the Jet Bot may not recognize it as pet waste but something it has to clean and then it may suck it up.
What to do if my Samsung Jet Bot VR50T95735W/SA Vacuum Cleaner Jet Bot has stopped during cleaning?
If your Samsung Jet Bot stops during cleaning, it could be due to a few reasons. If the Status Indicator turns red and stays red, place the Jet Bot manually on the Clean Station to charge it. If the Jet Bot is stuck on an obstacle like a cord, threshold, or raised spot, pick it up and move it away. If any fabric or string is caught in a Driving Wheel, turn off the power switch and remove it before using it again. Finally, check whether the No-go Zones are set correctly.
How to fix Samsung Jet Bot VR50T95735W/SA Jet Bot that cannot find the Clean Station?
If your Samsung Jet Bot vacuum can't find the Clean Station, check if there's a power failure or if the power plug is unplugged. Remove any obstacles around the Clean Station that might be blocking its path. Also, make sure to clean any foreign matter off the charging terminals, as this can affect charging.
How do I fix my Samsung Vacuum Cleaner Jet Bot that crosses the boundary?
To prevent your Samsung Jet Bot from crossing boundaries, ensure that the Boundary Markers are attached in a '(' shape, positioned 15 cm before the areas you want the Jet Bot to avoid.
Why is the suction power weak on my Samsung Vacuum Cleaner Jet Bot?
Weak suction power on your Samsung Jet Bot vacuum could be due to a few reasons. If the dustbin is too full, turn off the power switch and empty it. Also, check the brush at the bottom of the Jet Bot for any obstructions. If there's foreign matter, turn off the power switch and remove it. An increase in noise could also indicate a full dustbin, so turn off the power switch and empty it.
Why a map cannot be saved for Samsung Vacuum Cleaner Jet Bot?
To create a map, you need to register the device first and then start creating a map with the SmartThings App. When the Jet Bot starts cleaning from the Clean Station and completes cleaning one time in Auto Clean, a map is saved.
What to do if a message of the product registration failure appears for Samsung Vacuum Cleaner?
Try the product registration procedure again by referring to the pop-up messages. When the product registration fails repeatedly, restart the SmartThings App and try the product registration. All users should use the SAMSUNG account issued by the country which launches the product.
What to do if Jet Bot is connected to a smartphone without a problem, but the Jet Bot does not work with the smartphone for Samsung Jet Bot VR50T95735W/SA?
Turn off the SmartThings App and then run it again, or disconnect the smartphone from the wireless router and then connect it again, or turn off the power supply of the Jet Bot, turn it on, wait for a minute or longer, and then run the SmartThings App again.
Why does my Samsung Jet Bot VR50T95735W/SA Vacuum Cleaner Jet Bot cross No-go Zones?
If your Samsung Jet Bot crosses No-go Zones, it's likely because it's not starting its cleaning cycle from the Clean Station. Ensure that the Jet Bot begins cleaning from the Clean Station for the No-go Zones function to work correctly.
Why can't my Samsung Vacuum Cleaner Jet Bot find a room?
If your Samsung Jet Bot can't find a room, it might be because it's not starting from the Clean Station. If the Clean Station has been moved by 45 degrees or more than 1 meter from its original position, the Jet Bot will clean all areas without using the created map. Ensure the Jet Bot starts cleaning from the Clean Station. When creating a map, make sure the Jet Bot starts parallel to the wall. Also, remove obstacles within 0.5 m of the left and right sides and 1 m of the front side of the Clean Station.
Lists included accessories and provides purchase information for additional items.
Provides essential safety precautions and explains warning/caution symbols used in the manual.
Details general safety guidelines for operating the vacuum cleaner and its accessories.
Outlines specific warnings and restrictions for using the Jet Bot itself.
Covers safety related to power connections and pre-operation checks for the Jet Bot.
Provides instructions and warnings for safe operation of the Jet Bot during use.
Details safety precautions for cleaning and maintaining the Jet Bot and its components.
Step-by-step guide for setting up the Clean Station, including placement and power connection.
Instructions on how to charge the Jet Bot for the first time and check charging status.
Basic operations like powering on/off, starting, stopping, and using sleep mode.
Explains the meaning of LED status indicators for both the Jet Bot and the Clean Station.
Details various cleaning modes, suction power, and special cleaning functions.
Covers energy-saving mode, downtime, scheduled cleaning, and setting no-go zones.
Guides on how to use boundary markers to define cleaning areas or prevent entry.
Diagrams identifying all components of the Jet Bot and the Clean Station.
Detailed steps for emptying and cleaning the dustbin, driving wheel, and brush.
Instructions for cleaning sensor windows and the fine dust filter of the Jet Bot.
Procedures for replacing the dust bag and cleaning the fine dust filter of the Clean Station.
Steps to detach, clean, and reattach the bottom cover of the Clean Station.
Guide to setting up the wireless router and connecting the Jet Bot to the SmartThings App.
Explains how the Jet Bot checks for and installs software updates automatically.
Details the monitoring and control functions available through the SmartThings App.
Provides important notes and cautions related to installation, charging, and general usage.
Offers specific advice and precautions for cleaning the Jet Bot and its components.
Provides essential information and warnings for the proper usage and care of the battery.
Guides users on how to resolve common issues before contacting customer service.
Offers solutions for common symptoms and problems encountered with the Jet Bot.
Information regarding the open-source software used in the product and where to find the source code.
Instructions on how to reset the Jet Bot to its factory default settings.
Lists the technical specifications for the Jet Bot and the Clean Station.
General| Brand | Samsung |
|---|---|
| Model | Jet Bot VR50T95735W/SA |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page