English-13
Plug and Play
When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.
1 If the set is in standby mode, press the
POWER
button on the
remote control.
Result
: The message
Plug & Play
is displayed. It appears for a
little while, and then the
Language
menu is
automatically displayed.
2 Select the appropriate
Language
by pressing the or button.
The available languages are listed
.
You can choose one of 18 languages.
3 Press the
ENTER
button to confirm your choice.
Result: The message
Antenna Input Check
is displayed with
the
OK
selected.
4 Press the
ENTER
button.
Result
: The following countries are available:
Belgie - Deutschland - Espania - France -
Italia - Nederland - Schweiz - Sverige - UK -
East Europe -Others
5 Select your
Country
by pressing the or button.
Press the
ENTER
button.
Result
:
The
Auto Store
menu is displayed with the
Start selected.
6 Press the
ENTER
button.
Result
:
The channel search will start and end automatically.
7 Select the
Hour
or
min
by pressing the or button.
Set the
Hour/min
by pressing the or button.
(Refer to “
Setting and Displaying the Current Time”
on page 38)
8 Press the
MENU
button to confirm your setting.
Result
:
The
message
Enjoy your viewing
is displayed, and
then the channel which has been stored will be activated.
BN68-00751D-00Eng 7/26/04 7:43 PM Page 15
To Next Page
Loading...
